PUMPFIX MANIFOLD DN40 / DN50
PR 5012 - PR 5013
PR 5012 - PR 5013
The distributor is designed to be compatible with HERZ PUMPFIX pump sets.
HERZ offers:
- 2 circuits
- 3 circuits
The distributor is modular, which means that the distributors can be connected to each other and create several circuits.
Pump groups DN40 and DN50 are compatible with manifolds PR 5012 and PR 5013.
HERZ offers:
- 2 circuits
- 3 circuits
The distributor is modular, which means that the distributors can be connected to each other and create several circuits.
Pump groups DN40 and DN50 are compatible with manifolds PR 5012 and PR 5013.
HERZ distributor is used in heating systems when there are several heating circuits in the facility / system that we want to regulate according to different temperature and time regimes. HERZ PUMPFIX distributor is recommended when using several parallel HERZ PUMPFIX pump groups (in case of multi-circular heating or cold water cooling system). Pump group and distributor are designed in that way that they can be fitted directly to each other.
HERZ PUMPFIX distributor DN50 is suitable to PUMPFIX groups DN40 and DN50.
HERZ PUMPFIX distributor DN50 is suitable to PUMPFIX groups DN40 and DN50.
| ART. | IDENT | DN | Nr. of circuits | EAN | Flange | L [mm] |
L1 [mm] |
L2 [mm] |
L3 [mm] |
H [mm] |
H1 [mm] |
H2 [mm] |
H3 [mm] |
G1 [in] |
G1 [in] |
| PR 5012 | 1570012 | 50 | 2 | 9004174048401 | DN80 | 1173 | 180 | 260 | 620 | 800 (850, 900, 950) | 380 | 250 | 50 | 2 | 1/2 |
| PR 5013 | 1570013 | 50 | 3 | 9004174048418 | DN80 | 1510 | 180 | 260 | 880 | 800 (850, 900, 950) | 380 | 250 | 50 | 2 | 1/2 |
Max. operating temperature: |
110°C |
Max. admissible pressure: |
6 bar |
Fittings: |
Cast iron EN-GJMW-400-5, DIN EN 1562 |
Flat sealing: |
Klingerit |
Insulation: |
5 mm NP FR G 2905 + 15 mm C080 RN2 |
Mounting legs: |
Galvanized steel, adjustable height |
Housing: |
Powder coated steel (RAL 9005) |
Flange: |
acc. to EN1092-1 DN80/PN10 |
Medij:
Heating water according to ÖNORM H5195 or VDI- Standard 2035. The use of ethylene, or propylene glycol in a mixing ratio of 25- 50% is allowed. EPDM gaskets can be affected by Mineral oils lubricants and thus lead to failure of the EPDM seals. Please refer to the manufacturers documentation when using ethylene glycol products for frost and corrosion protection.
| COMPONENTS: |
| 1. Distributor body |
| 2. Insulation |
| 3. Nut G2 |
| 4. Flange DN80 (acc. to EN1092-1) |
| 5. Mounting legs (height adjustable) |
| 6. Plug G1/2 |
| 7. Mounting set for flange M16 (screws, nuts, washers) |
