PUMPFIX MIX BASIC DN32
PF 3210B - PF3213B
PF 3210B - PF3213B
Pump set for mixing heating circuit.
Components:
ball valve with thermometer (0 – 120°C) and check valve - BLUE
ball valve with thermometer (0 – 120°C) - RED
circulation pump
welded steel spacer (black)
3 way mixing valve
motor actuator
insulating shell
connection G3/4” for installation of overflow valve
Components:
ball valve with thermometer (0 – 120°C) and check valve - BLUE
ball valve with thermometer (0 – 120°C) - RED
circulation pump
welded steel spacer (black)
3 way mixing valve
motor actuator
insulating shell
connection G3/4” for installation of overflow valve
The HERZ-PUMPFIX MIX BASIC pump group is used in heating systems and cooling water systems. The pump group regulates the temperature of the heating circuit via electronic regulation. Built-in 3-way valve mixes hot supply and cold return to the desired temperature. It is possible to install circulation pumps of various manufacturers and types.
The main uses of the HERZ- PUMPFIX MIX BASIC pump group:
- systems with surface heating
- combined heating systems
The DN32 HERZ PUMPFIX BASIC pump group can be upgraded with a safety valve (1 4514 99) for additional functionality.
| Nominal pressure: | max. 10 bar |
| Max. operating temperature: | 110 °C |
| Short-term load: | 120 °C < 15 s |
| Min. operating temperature: | 0 °C (voda 0,5 °C) |
| Opening pressure for check valve : | 200 mmWc |
| Propylene glycol mixing ratio: | 25-50 % |
Heating water according to ÖNORM H5195 or VDI- Standard 2035. The use of ethylene, or propylene glycol in a mixing ratio of 25- 50% is allowed. EPDM gaskets can be affected by Mineral oils lubricants and thus lead to failure of the EPDM seals. Please refer to the manufacturers documentation when using ethylene glycol products for frost and corrosion protection.
Components:
1. Valve with thermometer (blue) and non-return valve
2. Valve with thermometer (red)
3. Spacer
4. Circulation pump*
5. Three way valve with a actuator (1 7712 63)
