PUMPFIX MIX DN50
PF 5010 - PF 5011
PF 5010 - PF 5011
Pump set for direct heating circuit or for connecting the water heater to the boiler.
- With thermal insulation,
- Ball valves with integrated thermometer for supply and return,
- Spacer,
- Check valve,
- 3 way mixing valve,
- Motor Actuator,
- Possible to integrate pumps from different suppliers.
- With thermal insulation,
- Ball valves with integrated thermometer for supply and return,
- Spacer,
- Check valve,
- 3 way mixing valve,
- Motor Actuator,
- Possible to integrate pumps from different suppliers.
The HERZ-PUMPFIX MIX pump group is used in heating systems and cooling water systems. The pump group regulates the temperature of the heating circuit via electronic regulation. Built-in 3-way valve mixes hot supply and cold return to the desired temperature. It is possible to install circulation pumps of various manufacturers and types.
The main uses of the HERZ- PUMPFIX MIX BASIC pump group:
- systems with surface heating
- combined heating systems
The main uses of the HERZ- PUMPFIX MIX BASIC pump group:
- systems with surface heating
- combined heating systems
| ART. | IDENT | DN | PN | EAN | PUMP | Kvs | L [mm] |
H [mm] |
L1 [mm] |
L2 [mm] |
L3 [mm] |
L4 [mm] |
L5 [mm] |
L6 [mm] |
G [in] |
G1 [in] |
| PF 5010 | 1771410 | 50 | 10 | 9004174048050 | - | 29,5 | 422 | 430 | 253 | 180 | 120 | 19 | 25 | 280 | 2 | 2 |
| PF 5011 | 1771411 | 50 | 10 | 9004174048036 | Wilo Stratos MAXO 50/0,5-9 PN6/10 | 29,5 | 422 | 430 | 253 | 180 | 120 | 19 | 25 | 280 | 2 | 2 |
| Nominal pressure: | max. 10 bar |
| Max. operating temperature: | 110 °C |
| Short-term load: | 120 °C < 15 s |
| Min. operating temperature: | 0 °C (voda 0,5 °C) |
| Opening pressure for check valve : | 200 mmWc |
| Propylene glycol mixing ratio: | 25-50 % |
Medium:
| Heating water according to ÖNORM H5195 or VDI- Standard 2035. The use of ethylene, or propylene glycol in a mixing ratio of 25- 50% is allowed. EPDM gaskets can be affected by Mineral oils lubricants and thus lead to failure of the EPDM seals. Please refer to the manufacturers documentation when using ethylene glycol products for frost and corrosion protection. |
1. Valve with thermometer (blue)
2. Valve with thermometer (red)
3. Check valve
4. Connector with free moving nut
5. Spacer
6. Ball valve
7. 3-way valve with actuator
8. Mounting bracket
%20DN40-DN50.jpg){kind=link}
%20DN40-DN50.jpg){kind=link}
